Machine Manufacturer Yamazaki Mazak Reveals IoT Can Reduce Lead Time
Mr. Tomohisa Yamazaki, the president of Yamazaki Mazak revealed that an increase in production cost in Japanese factories and the use of IoT can shorten lead time.
Orders of Machine Tools in 2018 are expected to hit record high
JMBTA revealed order volume of Machine Tools for the fiscal year 2018 had hit 2007’s record high and was expected to completed at around 1.75 trillion yen while the order volume in…
Goodyear Presents New Tire Technology Designed to Advance the Performance of Electric Vehicles
Goodyear offered a sneak peek during the 2018 Geneva International Motor Show of its EfficientGrip Performance with Electric Drive Technology, a prototype tir…
.gif)
Fujitsu Developed Blockchain for Production Control System
Fujitsu announced to develop its production control system by using Blockchain technology. The system would be able to inspect each product by scanning the QR code printed on it.
LINE’s Revolutions
LINE has drawn a plan for company growth, pushing the launch of new services underscoring to become a cashless society and making LINE a part of one’s daily life other than just an…
Demands in Small Aircrafts Soar: Two Giants Receive Landslide Orders
After the Farnborough Airshow, two giant aircraft companies received huge orders, especially for the small-sized passenger aircrafts.
Japanese Analyst’s View on "Can AI Overcome Humans After All?”
Mio Analytics has studied the intelligence of AI to see whether it can always beat human’s brain. If AI learns from faulty data, it is possible that AI could make a mistake.
HP Launches World’s Most Advanced Metals 3D Printing Technology for Mass Production
HP Metal Jet up to 50x more productive, delivering low-cost, high-quality final parts. New Metal Jet Production Service opens up world of applications to global customers.
Sony’s AI Achieves "World’s Fastest Deep Learning"
Sony Corporation has developed a deep learning process for AI, achieving the world’s fastest speed.
Three Technological Trends for Parts Manufacturing
Dr. Toshitaka Matsuoka, a professor at Tokyo University and a collaborative researcher at Riken, who is one of the experts in manufacturing technology has expressed his opinion tow…
2018: Another Year of AI
2018 was another year that AI evolved and grew continuously. But what are the reasons?
Hitachi High-Tech Analytical Science launches new Vulcan+ laser analyser range
Hitachi High-Tech เปิดตัว เครื่องมือวัดพกพาแบบ Laser Induced Breakdown Spectroscopy (LIBS) “Vulcan+” พร้อมโมเดลใหม่ “Optimum+” คงศักยภาพความเป็นผู้นำตลาดเครื่องมือวัดพกพาไว้ได้อย่างครบถ้วน
Honda to Evolve its Original High-Efficiency Electrification Technologies as “Honda e:TECHNOLOGY”
Honda announced the establishment of Honda e:TECHNOLOGY, a new collective name which represents Honda’s original high-efficiency electrification technologies.
Sodick “OPM250L” Metal 3D Printer Breaks All Rules of Complex Molds Production
The Sodick "OPM250L" Metal 3D Printer, a high-precision 3D metal printer in one of the "OPM Series," has changed the way of mold production. Combined with the progress of additive …
Gartner Predicts the Future of AI Technologies
I&O leaders need to strategically leverage AI as a core accelerant to digital business initiatives.
YCM Micron Workpiece Made in Taiwan
The ability to produce work in micron level should be the next potential target that the Thai manufacturing industry must reach to serve increasing demand of extremely high precisi…
C.C.S. Group Expects a Minimum Growth 100% in Next 5 Years
C.C.S. Group’s chief executive officer revealed with confidence that its growth by 100% is expected in the next five years. Let us look at the reason why he believes accordingly.
Airbus adapts production rates in COVID-19 environment
Airbus provides update on March commercial aircraft orders & deliveries and adapts production rates in COVID-19 environment
Airbus announces layoffs of 15,000 positions worldwide
Airbus plans to further adapt to COVID-19 environment. New measures contribute to safeguarding the Company’s future. Necessary reduction of approximately 15,000 positions across Ai…
Sodick Technology’s V-LINE® Integrated with INFILT-V for Higher Precision of Biodegradable Plastic Injection
The V-LINE® technology integrated with INFILT-V enables an excellent biodegradable plastic injection molding of producing thin, highly complex workpieces and those requiring high p…
Nissan innovation that makes cars quieter wins Popular Science award
‘Acoustic meta-material’ noise-reducing technology recognized in Best of What’s New category from Popular Science award 2020
Boeing forecast Southeast Asia Aviation Market growth in 20-year
Boeing forecast Southeast Asia Aviation Market Well Positioned for Recovery, with 20-year demand for 4,400 new airplanes valued at $700 billion.
NTIS - airasia explores urban drone deliveries
Teleport, the logistics venture of airasia Digital partnered with Malaysian Global Innovation and Creativity Centre (MaGIC) to launch the Urban Drone Delivery Sandbox and develop …
IBM Unveils World’s First 2 Nanometer Chip Technology, Opening a New Frontier for Semiconductors
The 2 nm nanosheet technology from IBM is projected to achieve 45% higher performance, or 75% lower energy use, than today’s most advanced 7 nm node chips.
Oerlikon Balzers signed a ten-year contract with MTU Aero Engines to coat next generation aero engine components to improve efficiency
To apply MTU’s owned erosion-resistant coating ERCoatnt on aerofoil components of next generation GTF aero engines used in the Airbus A320neo aircraft.
Boeing to Add 767-300BCF Conversion Lines at GAMECO to Meet Strong Market Demand
Boeing will open two new 767-300BCF conversion lines next year at GAMECO in Guangzhou, China
NISSAN AND WASEDA UNIVERSITY IN JAPAN TESTING JOINTLY DEVELOPED RECYCLING PROCESS FOR ELECTRIFIED VEHICLE MOTORS
Nissan Motor Co., Ltd. and Waseda University today announced the start of testing in Japan of a jointly developed recycling process that efficiently recovers high-purity rare-earth…
Sodick released an interview: Tanaka Foresight Inc. Eyeglass manufacturers in Japan.
Sodick released an interview: Tanaka Foresight Inc. insisting on manufacturing in Japan, and offering suggestions for simple eyeglass frames with a presence all their own.
CATL Launches Battery Swap Solution EVOGO Featuring Modular Battery Swapping
CATL's subsidiary CAES has rolled out EVOGO, its innovative modular battery swap solution, which includes battery blocks, fast battery swap stations, and an app.
Sodick released Fineplas Interview: Challenging New Technology, Metal 3D Printing and Automation support more sophisticated in-vehicle parts
Sodick released Fineplas interview on metal 3D printing and automation, the challenging new technology that is ahead of the times, to support more sophisticated in-vehicle parts
Epson launches “high-tech robot” primed for Thailand’s new gameplan towards high-potential industries
Epson’s launch of the “T-B series” SCARA robot, the highlight of METALEX March 2022, signals being primed for Thailand’s new gameplan towards high-potential industries.
GWM Invests CNY 9 billion on R&D, Focusing on New Energy and Intelligentization
GWM officially released the 2021 Annual Report, highlighting that the recent investment on research and development reached CNY 9.07 billion, marking another major R&D investment m…
Cognex In-Sight 2800 Combines Deep Learning and Traditional Vision in an Easy-to-Use Package
Cognex In-Sight 2800 Combines Deep Learning and Traditional Vision in an Easy-to-Use Package Automates error detection in minutes – no programming experience required
The TS touch probes from HEIDENHAIN help you perform setup, measuring, and inspection functions directly on the machine tool.
Touch probes from HEIDENHAIN are designed for use on machine tools, particularly milling machines and machining centers. Touch probes help reduce setup times, increase machine usa…
CATL launches CTP 3.0 battery "Qilin," achieves the highest integration level in the world
CATL launched Qilin, the third generation of its CTP (cell-to-pack) technology. With a record-breaking volume utilization efficiency of 72% and an energy density of up to 255 Wh/kg…
Toshiba takes on the world’s smallest LiDAR - Improving the “Eyes” of Autonomous Driving
LiDar is an essential sensor for automated driving. Toshiba is among the companies with a LiDAR that can handle Level 4 autonomous driving.
Polyplastics' New 3D Printing Technology for DURACON (R) POM Accelerates Product Development Cycle
Polyplastics' New 3D Printing Technology for DURACON (R) POM Accelerates Product Development Cycle
Okuma to Offer Full Lineup of "Green-Smart Machine" Products Suited for Decarbonized Society
Okuma Corporation is set to offer a full lineup of "Green-Smart Machine" products defined as intelligent machine tools that contribute to resolving environmental issues by autonomo…
CATL launches condensed battery with an energy density of up to 500 Wh/kg, enables electrification of passenger aircrafts
CATL condensed battery, a cutting-edge battery technology, was launched at Auto Shanghai. With an energy density of up to 500 Wh/kg, opening up a brand-new electrification scenario…
Dronamics Cargo Drone Takes First Flight, Paving the Way for the Future of Deliveries
Dronamics, the world's first cargo drone airline, announced today the successful completion of the first flight of its flagship aircraft, the Black Swan, at Balchik airport in Bulg…
Japan Uses AI to Reproduce Voice from Brain Waves
The Tokyo Institute of Technology uses AI to reproduce voice from brain waves, supporting patients with intractable diseases such as hearing loss and amyotrophic lateral sclerosis …
Generative AI Faces Escalating Regulatory Tighten
Generative AI, such as ChatGPT, is being seen as a potential risk to humanity's future, leading many countries to increase regulations for controlling Generative AI. Let's take a l…
Toshiba Develops Ultra-Compact Sensor Enables Real-Time Mixed Gas Concentration Measurement
In a significant advancement, Toshiba has unveiled a cutting-edge technology that revolutionizes the way we measure mixed gas concentrations. This innovation offers immediate, real…
CATL Launches Superfast Charging Battery Shenxing, Opens Up Era of EV Superfast Charging
CATL launched Shenxing, the world's first 4C superfast charging LFP battery, capable of delivering 400 km of driving range with a 10-minute charge as well as a range of over 700 km…
14 Years of R&D Growth of Japanese Companies - Toyota Tops with 1.24 Trillion Yen
R&D spending has risen continuously for 14 years, with Toyota leading at 1.24 trillion yen. A study of 154 companies revealed a 6.8% increase in fiscal 2023 compared to the previou…
Revolutionize Construction with Robots and Technology
Japan's construction industry is shaping a new landscape by integrating material handling robots and IoT technologies on job sites. With the aim of closing the labor shortage gap, …
Advances in FSW Technology for EV Component Production
Friction Stir Welding (FSW) technology has achieved significant strides in producing EV parts and components like battery systems, cooling systems, and chassis. Yet, for small and …
Toshiba Improves LiDAR Software to Track 99.9% of Objects
Toshiba has improved the software for its high-performance LiDAR sensor and developed technology that can track objects such as vehicles and people with 99.9% accuracy.
Eating sushi in space?
Yamagata University in Japan is pioneering the concept of eating sushi in space by developing a miniature 3D food printer using inkjet technology.
CBM Day 2024: Join the Premier Condition-Based Maintenance Event of the Year!
Get ready for the most anticipated seminar and machinery maintenance technology show of the year, CBM Day 2024! This prestigious event, now in its 17th edition, will be held at the…